IKRA IEG 2500 Manual De Instrucciones página 21

10. Repair Service
Attention! Electrical repairs may only be carried
out by a skilled electrician or a customer service
workshop!
If you send the machine to us for repair, please describe
the fault.
11. Waste disposal and environmental protec-
tion
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.
12. Spare parts
Please contact our service department if you need acces-
sories or spare parts.
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to per-
sons or damage to the machine.
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
GB | Operating Instructions
13. Technical Data
Model
Nominal voltage
Nominal frequency
Nominal power
No-load speed
Max.branch diameter
Collecting container
Weight
Sound pressure level
(EN 13683/A2:2011)
Sound power level LWA
(EN 13683/A2:2011)
Service life S6 40% (full load: 4 min., no-load: 6 min.)
Class of protection II; Degree of protection IP24
Technical and visual changes can be made during the
course of the further development and without prior no-
tice. All information given in these instructions for use are
therefore given without guarantee. Legal claims, which
are based on the instructions for use can therefore not
be made.
14. Warranty
For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts and defects caused by the use of no fitting
accessories, repair with parts that are not original parts
of the manufacturer, use of force, strokes and breaking
as well as mischievous overloading of the motor are
excluded from this warranty. Warranty replacement does
only include defective parts, not complete devices. War-
ranty repair shall exclusively be carried out by authorized
service partners or by the company's customer service.
In the case of any intervention of not authorized person-
nel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
GB-8
IEG 2500
V~ 230-240
HZ 50
W 2500 (S6, 40%)
rpm 4050
mm ≤40
Liter 50
kg 14,1
dB(A) 95,7 (K=3,0)
dB(A) 111