GE PP9830 Manual Del Propietario E Instalación página 20

Z
O
i
I-.
U
=)
!-.
Z
u
Z
O
g
_J
_J
Z
i
Installation Instructions
INSTALLING THE COOKTOP
r-q INSTALLINGTHE COOKTOP:
,_ CAUTION:
DO NOT LIFT FROM
VENT OPENING.
Lift the cooktop by the glass side edges as shown.
NOTE:Do not usethe glass top vent opening to lift or move
the cooktop into position.
\
Lower the cooktop into the countertop opening, guiding it
into position. Glass isfragile-do not allow it to drop onto the
countertop. Support from the underside and lower slowly.
Carefully remove your fingers one corner at a time to lower
the cooktop into position.
NOTE:Do not use Silicone RTV or caulk to bond cooktop
glass to countertop.
Once the unit is placed in countertop; visually inspect the
cooktop and counter, appearance or alignment concerns.
[_ INSTALLING THE OPTIONAL
INSTALLATION BRACKETS
NOTE:Checkfor glassflatness in Step9 before installing
optional installationbrackets.
Optional installation
bracket and
thumbscrew (not
included)
I
Cooktop LJ_ Countertop
Screws su pplied____L_-_----- Thumbscrew
with cooktop
Toorder optional installationbrackets/thumb screws,callthe
National PartsCenter at 800.626.2002.
Ordertwo of each part: WB02X11331Bracket
WB01X10353 Screw
Toinstall optional installationbrackets:
Remove2 screwson both sidesunder cooktop.
Align optional installationbracketunder cooktop and reinstall
screwsthrough the slot in the bracket. Dothis on both sidesof
the cooktop.
Threadthe thumb screw through the hole in the bracketand
tighten to securethe cooktop to the countertop. Repeaton the
other side.
IHPORTANT: Turnthumb screw until it touchesthe bottom of
the countertop. Do not overtighten.
0 49 80635 2