i-box Glow Guia Del Usuario página 6

3. Standby and Audio Modes
Short press the MODE key (1) to switch between modes – FM radio, Bluetooth and white
noise/nature soundtracks. In either of the modes, long press the
standby mode.
Standby
4. Setting the Time
In some regions, the time will auto-set once the Glow receives an FM signal, in most regions though
you will need to set it manually. To set the time manually, you need to be in standby mode, to enter
standby mode long press the
to start setting the time.
4.1 Set the Display Format
Standby
4.2 Set the Hour & Minutes
5. Setting the Alarms
To set an alarm, you need to be in standby mode, to enter standby mode long press the
key (1). Once in standby mode, long press the corresponding alarm key, 1 (6) or 2 (7), to start
setting that alarm.
1
Standby
5.1 Set Hour & Minutes
AL1
5.2 Select Alarm Sound
Choose from beep (bP), FM radio, white noise or the selection of nature soundtracks. FM will use
the last played station. When the alarm(s) sound, they will gradually increase in volume up to the
default maximum volume.
AL1
Beep
AL1
Flowing Water
06 | i-box
FM
FM Radio
Bluetooth
Soundtracks
MODE key (1). Long press the
AL1
Alarm 1
AL1
FM Radio
AL1
1
Birdsong
Standby
AL1
1
AL1
White Noise
AL1
MODE key (1) to return to
PLAY/PAUSE / CLOCK key (3)
AL1 AL1
AL1
Frogs
MODE
1