Troubleshooting; Technical Specifications - cecotec READYWARM 2000 MAX CERAMIC ROTATE SMART Manual De Instrucciones

ENGLISH
4. If you stop using the heater, unplug it from the socket and store it in a dry place.
5. To change the battery follow the steps shown in figure 4.

5. TROUBLESHOOTING

Do not repair or disassemble the device yourself, unauthorised repair attempts will void the
warranty and may cause personal injury.
Problem Possible cause
There is 4. The power cord is not connected.
no power 5. No power comes out of the socket
supply 6. The power switch on the back of the
heater is in the off position.
Smell 2. The appliance is new. When using the
The appliance for the first time, the motor
appliance fan may emit a slight odour. The smell
produces will disappear within the first week
an of use.
unusual
odour
If the problem persists after trying the above solutions, please contact Cecotec's official
Technical Support Service.

6. TECHNICAL SPECIFICATIONS

Product reference: 08276
Product: ReadyWarm 2000 Max Ceramic Rotate Smart
Power: 2000 W
Voltage: 220 - 240 V
Frequency: 50 - 60 Hz
38
READYWARM 2000 MAX CERAMIC ROTATE SMART
Solution
4. Install the power cord.
5. Check that the socket is
turned on.
6. Make sure the power switch
on the back of the heater is in
the on position.
No action required.