Publicidad
Idiomas disponibles
Idiomas disponibles
Check motor safety filter frequently and
change when dirty.
Electrical
Shock Hazard
Unplug
power cord from
electrical
outlet.
Do not operate
the vacuum
cleaner
without
the motor safety
filter.
Be sure the filter is dry and
properly
installed
to prevent
motor
failure
and/or electrical
shock.
Remove
the dust bag as outlined
in the
DUST BAG REPLACEMENT
section.
MOTOR SAFETY
FILTER
ELECTROSTATIC
1. This white & grey
filter must be
replaced
when dirty.
It should
be
Motor
SafeW
replaced
regularly
FilteJ
depending
on use
conditions.
The ill-
ter CANNOT
be
washed
as it will
lose its dust trap-
ping ability.
Note: See PARTS AND FEATURES
for
motor safety filter number.
Motor
Safety
Filter
2. If the filter,
located in the bot-
tom of the bag
cavity, is dirty,
remove it by
pulling forward out
from under the
ribs.
3.
Replace
the
filter, smooth
(white) side up,
Motor
by sliding it back
Safety
into place under
the ribs in the
bag cavity.
Replace
the bag as outlined in the DUST
BAG REPLACEMENT
section.
!
WARNING
Do not operate
without exhaust
filter.
EXHAUST
FILTER
HEn
The exhaust filter cartridge must be
replaced
when dirty.
It should
be
g
replaced
regularly
depending
on use
conditions. The filter CANNOT
be
washed
as it will lose its dust trap-
ping ability.
Note: See PARTS AND FEATURES
for
the exhaust filter number.
Slide the
exhaust
filter
cover release
down.
Pull out
on exhaust
fil-
ter cover to
remove from
bag cover.
Bag
Cover---_
"_1
Exhaust Fi.er
I_L
I J
Cover ReleaserS1
I
Exhaus,
Filter
_wJ_\
Cove,_" _4j
Bag
Exhaust
Remove the
exhaust filter car-
tridge from the
bag cover.
Replace the exhaust filter
cartridge,
carefully posi-
tioning it so that it fits into
the bag cover. The black
edge of the filter
should be facing
away
from the operator.
Push
only on filter cartridge
frame, not on filter itself.
--r
Cover Release_
Exhaust
_-
F, t or
I
Bag
Exhaus
Replace the
exhaust filter
cover and
secure the
latch by push-
ing it upward.
15
Publicidad
