Kenmore 116.35622 Manual Del Propietário página 8

Releasethe handleby pressingdown on
the handlereleasepedalwith your
foot
and pulling back and down on the handle
with your hand.
Release Pedal
OFF - Turns OFF the vacuum (suction)
motor.
ON - Turns ON the vacuum motor to HIGH
suction level for cleaning of most carpets
and rugs. In order to get MEDIUM and
LOW suction levels for cleaning, press the
SUCTION button to cycle the vacuum
motor through MEDIUM, LOW, and HIGH
suction levels respectively.
SUCTION - Changes the suction level of
the vacuum cleaner motor. If the unit is
OFF, pressing the SUCTION button turns
ON the vacuum cleaner motor to HIGH
suction level for cleaning of most carpets,
rugs, and fabrics, if the unit is ON, press-
ing the SUCTION button cycles the vacu-
um cteaner motor through suction levels.
Dusting
Combination
Hos_
_Hose
Collar
Identify each of the attachments shown
above.
TO USE ATTACHMENTS
Place the carpeVbare floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor setting.
See CARPET/BARE FLOOR SELEC-
TOR section.
When returning the bare floor selector to
the carpet setting, use caution as the
selector can move quickly to that set-
ting due to tension created by the belt.
Remove the tower end of the stretch hose
from the cleaner by grasping the hose
collar, twisting and pulling straight out.
The attachments can now be added to
the hose.
Note: The motor protector may open
when using attachments or when cleaning
new carpet, due to reduced airflow
caused by the attachments themselves or
by new carpet lint filling the bag quickly.
See the
TROUBLESHOOTING section.
Electrical Shock And Personal
Injury Hazard
Disconnect electrical supply before
performing maintenance to the
unit. Failure to do so could result in
electrical shock or personal injury
from vacuum cleaner suddenly
starting.
8