Car Comfort 17176 Manual De Instrucciones página 8

Faulty electrical installation or excessive voltage can lead to an
electrical shock.
- Only connect the seat pad to a 12V vehicle power socket
(cigarette lighter).
- Ensure that the 12 V vehicle power socket is always readily
accessible so that you can quickly disconnect the seat pad
connection cable in the event of a fault.
- Do not operate the seat pad if it has visible damage or if the
connection cable or the 12V plug is defective.
- If the connection cable of the seat pad is damaged, it must be
replaced by the manufacturer or its customer service agent or
by a similarly qualified person in order to avoid hazards.
- Do not open up the seat pad yourself, but have any repair
carried out by qualified personnel. Please contact a specialist
workshop for such work. All liability and claims against warran-
ty are excluded, in the event of independent repairs, improper
connection or incorrect operation.
- Only parts which correspond to the original device specifi-
cations may be used for repairs. This seat pad incorporates
electrical and mechanical parts, which are indispensable for
protection against potential hazards.
- Do not immerse the seat pad, or the connection cable or
plugs into water or other liquids.
- Never touch the 12V plug with wet hands.
- Never pull the 12V plug out of the 12V power supply socket
by the cable, but always grip and pull the plug directly.
- Never use the connection cable as a carrying handle.
- Keep the seat pad, as well as the 12V plug and the connection
cable, away from naked flames and hot surfaces.
- Do not kink the connection cable or place it over sharp edges.
- Only use the seat pad inside the vehicle. Never operate it
while exposed to rain.
- Make sure that children do not poke or insert any objects into
the seat pad.
- When you are not using the seat pad, or if you clean it, or if a
fault occurs, always turn off the seat pad and pull out the 12V
plug from the 12V power supply socket.
- Disconnect the connection cable from the 12V power supply
socket every time before cleaning and care, or after use.
sons with reduced physical, sensory or mental abili-
ties (e.g. partially disabled persons, elderly persons
with limited physical and mental abilities) or lack of
experience and knowledge (e.g. older children).
- Children younger than 3 years are not allowed to use the seat pad.
- Children older than 3 years are allowed to use the seat pad
only if a parent or supervisor has preset the control element
or the child has been adequately instructed on how it can
operate the regulator/control unit safely.
- This seat pad can be used by children over 8 years of age, as
well as by persons with reduced physical, sensory or mental
abilities or lack of experience and knowledge when supervi-
8
Danger of electric shock!
Risks for children and per-
sed or instructed regarding the safe use of the seat pad and
the resulting hazards. Children must not play with the seat
pad. Cleaning and maintenance by the user must not be
carried out by children without supervision.
- Do not leave the seat pad unattended during operation.
Improper handling of the seat pad can lead to damage of the
seat pad.
- Do not use blankets, pillows or covers on the seat pad.
- Do not allow the connection cable to come into contact with
hot parts.
- Never expose the seat pad to high temperature (heating, etc.)
or the influence of weather (rain, etc.).
- Do not immerse the seat pad in water for cleaning and do not
use a steam cleaner for cleaning.
- Do not use the seat pad if it has cracks or tears or has become
deformed. Replace damaged parts only with appropriate
original spare parts.
- Do not stick any needles or pointed objects into the seat pad.
- To avoid overheating, do not expose the seat pad to heat
sources, naked flames, such as candles or direct sunlight.
- During operation, make sure that the 12V plug is securely
plugged into the 12V power supply socket and is free from dirt.
If there is insufficient contact between the plug and the 12V
power supply socket, the vibration of the vehicle can cause the
power supply to be switched on and off at short intervals. This
can lead to overheating.
- Do not switch the seat pad on when it is in folded or pressed
together.
- Do not place heavy objects such as suitcases on the seat pad.
3. Checking the seat pad and the scope of supply
The seat pad can be easily damaged, if you carelessly open the
packaging with a sharp knife or other sharp object.
Therefore, follow these steps very carefully when opening.
1. Take the seat pad from the packaging and check whether the pad or individual parts are
damaged. If this is the case, do not use the seat pad. Consult the manufacturer.
2. Check whether the delivery is complete (see Fig. A).
4. Use
Improper handling of the seat pad may cause personal injury or
damage to the seat pad.
- Before operation, make sure that the 12V plug and the
connection cable are dry.
- Switch off the seat pad immediately if any pain is experienced.
- Do not bend or fold the seat pad and keep it away from water
and other liquids.
Risk of damage!
Risk of damage!
Risk of injury!