Descargar Imprimir esta página

cecotec BOLERO AGUAZERO 4201 E Manual De Instrucciones página 91

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
Water inlet hose connection (optional, depending on model)
Connect the cold-water supply hose to a 3/4 inch/19 mm threaded connector and make
-
sure it is securely in place.
conector roscado de 3/4 pulgadas/19 mm y asegúrese de que está bien sujeto en su
-
lugar.
If the water pipes are new or have not been used for a long period of time, let the water
-
run to ensure that it is clean and free of impurities.
deje correr el agua para asegurarse de que está limpia y sin impurezas.
-
If this precaution is not taken, there is a risk that the water inlet will be blocked and the
-
appliance will be damaged. (Fig. 22).
Drain hose connection
Place the drain hose of your machine into the drainpipe without kinking it.
-
If the length of the hose is not sufficient, you can use an extension made of the same
-
material as the original hose. Remember that the length of the hose must not exceed 4
metres, even with an extension.
If the drain hose is longer than 4 m, the dishes will not be cleaned properly. Secure the
-
hose to the drainpipe to prevent it from coming loose during the washing process (Fig.
23).
Electrical connections
Before plugging the appliance into the mains, make sure that:
the plug is earthed and complies with current regulations.
-
the socket can withstand the maximum load of the appliance, which is indicated on the
-
rating plate on the inside of the door (see description of the appliance).
the supply voltage is within the values indicated on the nameplate inside the door.
-
the socket is compatible with the plug of the appliance. If not, have the plug replaced by
-
an authorised technician. Do not use an extension cord or multiple sockets.
Once the appliance has been installed, the power cable and the power socket must be
easily accessible.
The cable must not be bent or compressed.
If the power cord is damaged, it must be replaced by the official Cecotec Technical
Support Service or similarly qualified personnel to avoid any danger.
Cecotec will not be held responsible for any incidents that occur if these rules are not
followed.
BOLERO AGUAZERO 4201 E _4201 INOX E
ENGLISH
91

Publicidad

loading

Este manual también es adecuado para:

Bolero aguazero 4201 inox e0278102782