Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance, cleaning and repair
u Maintenance: Regularly check if the screw connections are tight.
u Cleaning: Use a slightly damp cloth to clean the speaker stand. Do not use chlorinated or
u
abrasive cleaning agents. These will cause damage to the surface and varnish.
u Repair: Immediately repair any damage that occurs and stop using the speaker stand.
u
Maintenance work may only be carried out if you have the necessary knowledge. If any parts
u
are missing,contact the manufacturer at www.k-m.de.
Fault and troubleshooting
Fault/cause
The stand wobbles or is
unstable
Speaker cannot be
mounted on stand
Storage, disposal
Store the speaker stand in a dry place.
Recycle the components after they are disassembled:
u Scrape all components made of metal.
u Recycle or reuse all plastic, paper, and cardboard components.
u Sort all other components according to material composition and dispose of them
u
according to local regulations.
Contact information
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: +49 9342/8060
Fax: +49 9342/806-150
E-Mail: contact@k-m.de
Web: www.k-m.de
29680-000-55 Rev.01 03-80-968-00 10/23
Check/Remedy
● Check surface and footprint.
● Check screw connection between base and base tube,
●
and re-tighten if necessary.
● Check whether the smallest diameter is set on the
»Ring Lock«. Turn the clamping sleeve in the open direction.
●
Publicidad
