AIRROBO P20 Manual De Usuario página 5

Part 3 Installation and operation
3.1 Connect the charging base
Assemble the charging base and plug the adapter into a wall socket.
Place the charging base against a wall and keep the surrounding space of about 1 meter
(3 feet) on either side and about 2 meters (6 feet) in front of the charging base clear of
any obstructions. The power indicator will be on to show good power connection.
3.2 Charging the robot for the first time
Place the robot on the charging base to charge, making sure that the contact points
are aligned with the charging base.
To better maintain the battery life:
① Keep charging the robot for 4-6 hours before first use. When fully charged, the
indicator will stop blinking.
② During the normal use, the robot will automatically come back to its charging base,
connected to the power supply, to charge.
③ If the robot will not be used for a long time, please turn off the power after it is fully
charged and place it in a dry and cool environment. Please charge it every three months
to avoid irreversible damage to the battery.
Notes:
• Before using, remove the protective strip and bumper stopper on the bumper to guarantee
normal product use.
• The power switch is on the side of the robot, press I to turn it on, and press O to turn it off.
• The robot will automatically return to the charging base when the battery runs low.
X
3.3 App Download and Wi-Fi Connection
Notes: Please make sure the robot and mobile phone are both in the effective coverage
area of the same Wi-Fi router while connecting the robot to Wi-Fi. Please follow below
instructions or the prompts in the app to connect. If the connection fails, it's probably
because you are using a 5 GHs network. Please check out Common router setting method
and change it to 2.4GHz.
AIRROBO
1. Scan the QR code
or search AIRROBO in
App Store or Google
Play to download the
APP.
2. Log in the AIRROBO
APP. For new users,
please create your
Power
account before login.
switch
- 4 -
5
1.1 Please make sure 1.2 Turn on the power
your phone is
switch on the side of the
connected to a
robot, and press the switch
2.4GHz Wi-Fi network
and turn on the to position I . The robot
Bluetooth before
can then enter the
downloading app.
configuration mode.
3. Click [Add device] or 4. Select a 2.4GHz Wi-Fi network and enter
press [+] to add the
Wi-Fi name and password. Please note that
robot.
a dual band with mixed mode (2.4GHz +
5GHz) or simply 5GHz Wi-Fi network will not
be able to connect the robot.
EN