Please Read the Manual Carefully Before Installation
Please note
Electrical connection
The oven is fitted with a plug and must only be connected to a properly installed earthed
socket. The socket must only be installed and the connecting cable must only be
replaced by a qualified electrician, and in accordance with the appropriate regulations.
If the plug is no longer accessible following installation, an all pole isolating switch must
be present on the installation side with a contact gap of at least 3 mm.
The fitted cabinet must not have a back wall behind the appliance.
Minimum installation height: 85 cm.
Do not cover ventilation slots and suction holes.
Note:
Do not trap or bend the power cable.
A. Built-in furniture
Installation Instructions
380+2
51