English
Owner´s manual
•
Fig. 8
Fig. 9
Fig. 11
On / Off
1. Pull the pressure switch up to turn on, the compressor starts and injects air into the tank through the
supply line (Fig. 8).
2. To switch off the compressor, press the switch to turn off. The compressor continues to run according to
the automatic cycle until the output line switch is turned off.
WARNING:
Always disconnect the plug and drain the tank once you have completed your work.
Always wait at least 10 seconds after the compressor shuts off before restarting it.
28
POWER ON
Fig. 10
Fig. 12
TURNED OFF
G
H