Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Ex.: When "TRE" is selected
2
Indication pattern changes as
you adjust the level.
Indication
To do:
BAS*
1
Adjust the bass.
(bass)
TRE*
1
Adjust the treble.
(treble)
FAD*
Adjust the front
2
(fader)
and rear speaker
balance.
BAL
Adjust the left
(balance)
and right speaker
balance.
LOUD*
1
Boost low and
(loudness)
high frequencies
to produce a well-
balanced sound at
low volume level.
VOL*
Adjust the
3
(volume)
volume.
1
*
When you adjust the bass, treble, or
loudness, the adjustment you have made is
stored for the currently selected sound mode
(C-EQ) including "USER."
2
*
If you are using a two-speaker system, set the
fader level to "00."
3
*
Normally the +/– buttons work as the volume
control. So you do not have to select "VOL"
to adjust the volume level.
4
*
Depending on the amplifier gain control
setting. (See page 14 for details.)
Range
–06 (min.)
to
+06 (max.)
–06 (min.)
to
+06 (max.)
R06 (Rear
only)
to
F06 (Front
only)
L06 (Left
only)
to
R06 (Right
only)
LOUD ON
J
LOUD OFF
00 (min.) to
30 or 50
(max.)*
4
13
Publicidad
