Item number
Power Supply
Type
Voltage Range
Mains fuse
Secondary Voltage
Secondary Current
Secondary Connector
Primary Connector
Safety Class
Max power consumption
Idle power consumption
Standby power consuption
Mains Inrush Current
Operating Temperature
General
Time to standby
Material
Dimensions (W x H x D)
Weight
Included Accessories
DISPOSAL
Packaging:
1. Packaging can be fed into the reusable material cycle using the usual disposal methods.
2. Please separate the packaging in accordance with the disposal laws and recycling
regulations in your country.
Device:
1. This device is subject to the European Directive on Waste Electrical and Electronic
Equipment, as amended. WEEE Directive Waste Electrical and Electronic Equipment.
Old devices and batteries do not belong in household waste. The old device or batteries
must be disposed of via an authorised waste disposal company or a municipal waste
disposal facility. Please observe the applicable regulations in your country!
2. Observe all disposal laws applicable in your country.
3. As a private customer, you can obtain information on environmentally-friendly disposal
options from the seller of the product or the appropriate regional authorities.
LDAMP205
External SMPS
100 VAC – 240 VAC (+-10%), 50–60 Hz
None
24 V DC
3.5 A
Terminal Block 5.08mm 2-pole
IEC Jack
Class 3
115 W (sine 1 kHz with 2 x 4 Ohm load)
3.5 W (no signal input)
< 0.5 W
1.5A @ 230VAC
0°C – 40°C; < 85% humidity, non condensing
20 min
Steel chassis, Plastic Front panel
142 (W) x 53 (H) x 221.7 (D)mm (height with rubber feet)
1.0 kg
External power supply, Mounting plates for surface mount applications,
Terminal blocks for Electrical Connections.
17