LD Systems DIO 22 Manual De Usuario página 11

PSE+DATA (Power Sourcing Equipment)
5
Dante® interface with RJ45 socket for connecting further Dante® devices to the Dante® network.
If the DIO 22 or DIO 44 is supplied with power via an external power supply unit, another DIO 22 or
DIO 44 can be supplied with power via PoE (see connection example 2).
PD+DATA (Powered Device)
6
Dante® interface with RJ45 socket for connecting the DIO 22 or DIO 44 to a Dante® network.
The DIO 22 or DIO 44 can be supplied with voltage via PoE+ (Power over Ethernet plus) or better.
9
10
11
9
10
11
POWER SYMBOL
7
As soon as the DIO 22 or DIO 44 is supplied with voltage, the starting process begins.
During the start-up process, the white power symbol flashes and the line outputs OUTPUT are
muted. When the start-up process is completed after a few seconds, the symbol lights up
permanently and the unit is ready for operation.
ROTARY-PUSH ENCODER
8
The status query and editing of the settings of the input channels is done with the help of the
rotary-push encoder.
Status request: Press the encoder briefly and then rotate it to sequentially retrieve the status
information of each input channel. The number of the selected channel lights up. The status
of the phantom power (symbol lights up orange = on / symbol does not light up = off) and the
value of the input gain (-15, 0, +15, +30, selected value lights up white) are displayed.
8
12
8
12
13
7
13
7
11