Blackmagic Design 2110 IP Converter 3x3G Manual De Instalación Y Funcionamiento página 10

Network Status
Video Standard
Blackmagic 2110 IP Converter 3x3G supports the following video standards:
SD Video
HD Video
Input or Output Indicator
Displays the current input or output. Switch between input and output mode by double pressing
any of the numbered buttons. The numbered button will also illuminate when selected. Input
and output labels can be edited using the Converters Setup utility.
Audio Meters
Displays the audio levels of the selected input or output. Meter type can be selected via the
audio menu with options including VU -18dBFS, VU -20dBFS, PPM -18dBFS or PPM -20dBFS
reference levels.
Using the LCD Menu
Press the 'menu' button on the front panel to open the menu settings.
Connected via 10G Ethernet point to point or via a network switch
Network not connected
525i59.94 NTSC, 625i50 PAL
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30,
1080p50, 1080p59, 1080p59.94, 1080p60
SDI input
SDI output
1 MENU
2 SET
3 LOCK
Using The Front Panel 10