HUANUO HNCM17 Manual De Instrucciones página 2

IMPORTANT SAFETY INSTRUCTIONS
• Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact our
customer service at support@huanuoav.com.
CAUTION: Avoid potential personal injuries and property damage!
• Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We are not liable for damage or injury caused by
incorrect assembly or inappropriate use.
• The desk must be capable of supporting five times the weight of the monitor and
mount combined.
Check the VESA Pattern of Your Monitor before the Installation
If your monitor VESA is greater than 100x100 mm/4x4 in or less than
VESA 75x75mm/3x3in, this mount is NOT compatible.
If this desk mount is NOT compatible, please contact customer service
at support@huanuoav.com to find a compatible product.
Weight Restrictions
22.05 lbs.
(10 kg)
If your monitor weighs
more, this mount is NOT
compatible.
Tools Need（Not Included）
Phillips
Screwdriver
DO NOT exceed the maximum weight indicated.This mounting
system is intended for use only within the maximum weights
indicated. Use with products heavier than the maximum weights
indicated may result in failure of the mount and its accessories,
causing possible damage and or injury.
Electric Drill 7/16 in (11mm) - 55/64 in (22mm)
(Optional)
75 mm ≈ 3 in
100 mm ≈ 4 in
Minimum VESA pattern:
75mm/3 in (W)x75mm/3 in (H)
WARNING
Drill Bit(Optional)
01
3/8 in (10mm)
Wrench