Ashley Furniture M8X332 Manual Del Usuario página 7

Installat ion Guide
4
Keep the bed folded. Flip over the
bed with the bottom box on and let
the bed stand on the 4 legs. Discard
the bottom box.
A R D
D B O
H E A
6
Motion sensor installation
=
Prepare The Motion Sensor Hardware.
STEP 1: Connect the motion sensor
to the mounting bracket.
STEP 2: Rotate the mounting
bracket 90 degrees clockwise
STEP 3:
+
Motion Mounting
Sensor Bracket
DONE !
Customer Service Toll Free: 1-800-248-5988
—04—
5
Install the remaining 2 legs on the foot
end of the bed, make sure the legs are tight.
Uncoil the DC power cord (connected to the
control box) and put it to the side of the bed.
A R D
D B O
H E A
Connect The Motion Sensor Connectors.
STEP 1: Clip the mounting bracket onto the center adjustable legs
as illustrated.
A R D
D B O
H E A
STEP 2: Connect the motion sensor connectors as illustrated.
Note there are two connectors, one on each side of the bed.
Control Box
DC Power Cord