UFESA PV1100C Daily Manual De Instrucciones página 25

PROBLEM POSSIBLE CAUSE
Connection problem
Soleplate is not
Temperature control is in MIN
iron is turned on.
position
Steam control is selected in non-steam
Iron does not produce
position.
steam
Selected temperature is lower than that
specified to use with steam.
Spray function does
not work
Steam jet function was used very
frequently within a short period.
Steam jet and vertical
steam jet function
does not work
produce steam.
The soleplate has a build-up of scale
White streaks come
because it has not been self-cleaned
the soleplate
PRODUCT DISPOSAL
This product complies with European Directive 2012/19/EU on electrical and electronic
framework applicable in the European Union for the disposal and reuse of waste electronic
and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product.
25
SOLUTION
outlet.
Select adequate temperature
Fill water tank
Set steam control between positions of
minimum steam and maximum steam.
Fill water tank
Put iron on horizontal position and wait
becomes fixed.
The variable steam knob must be set
on"0"position until the iron is hot.
to do it at least every two weeks.