GOAL ZERO FLEX 100i Guia Del Usuario página 6

How it Works
Plug the 4mm solar connectors on the front of your Flex 100i into a 4mm solar
connector, combiner, or adapter to plug into your desired device to collect and
use solar power.
To plug the Flex 100i into a Yeti you will need a 4mm Solar Connector to HPP
adapter (SKU: 98014), which you can find at GoalZero.com.
4
Using Your Product
How to Install Your Panels
The Flex 100i has four mounting holes (one on each corner) that can be used to
install in your desired configuration. This flexible panel is designed for a variety of
applications and installation solutions. The panel must be secured or fastened to
something stable when in use to avoid product damage and to ensure efficiency
over the panel's lifetime.
Please consult a professional if you have questions or concerns about installing or
using your Flex 100i panel.
How to Disconnect Your Panels
The Flex 100i comes with a 4mm solar connector disconnect tool to help you
disconnect the 4mm solar connectors. Push the prongs of the tool on the 4mm
solar connector tabs to release the connection.
Disconnect Tool
Connecting Multiple Panels
When connecting multiple panels, it is important to be mindful of the voltage
input limitations of the device you are charging. The amount of input is impacted
by whether you are connecting panels in a series or parallel configuration. Visit
the Goal Zero website for more information about optimum solar panel setup:
4 mm connectors
5