Publicidad
Idiomas disponibles
Idiomas disponibles
LIGHT REPLACEMENT
•
Switch off the extractor hood and isolate the extractor hood by
pulling out the mains plug or switching off the fuse.
•
Remove the grease filter.
•
Replace the lamp (commercially) led modules, separate ballast.
•
Reconnect the power by inserting the mains plug or by switching on the fuse.
MAX POWER
Filament
40 Watts
lamp
Filament
40 Watts
lamp
Halogen
28 Watts
lamp
LED
3 Watts
module
LED
1.5 Watts
modules,
separate
ballast
HOW TO OPERATE
The range hood over your stove is there to remove smoke, vapors, heat, and cooking odors.
•
Turn the fan on a few minutes before you start cooking. Choose
between three speed options (LOW, MEDIUM & HIGH).
•
If you need light, press the ON/OFF switch on the control
panel to turn on the dual LED lights.
•
Start cooking.
•
Once finished, leave it running for 15 minutes and then turn off.
11
VOLTAGE
LAMP CAP ILCOS D CODE
110-127V
E14
220-240V
E14
220-240V
E14
110-240V
E14
120V
IBT-40-110/127-E14-25/58
IBT-40-220/240-E14-25/58
HSG-28-220/240-E14-37
DBL-3-H-E14-35
DSH-1.5-S-33.2/120
Publicidad
