Publicidad
Idiomas disponibles
Idiomas disponibles
HELPFUL TIPS
FAULT
Light on, but
motor does
not work
Both light and
motor do not work
Oil Leakage
Vibration
Insufficient suction The distance between
The machine
inclines
CAUSE
The blades are blocked
The capacitor is damaged
The motor is damaged
The internal wiring
is disconnected
Light damaged
Power cord is loose
Outlet and air ventilation
is not tightly sealed
Leakage from the
connection of U-shaped
section and cover
The blade, if damaged,
can cause vibrating
The motor is not
tightly fastened
The cooker hood is
not tightly fixed
the cooker hood and
cooker top is too large
Too much ventilation from
open doors or windows
The fixing or hanging
screws are not
tight enough
SOLUTION
Replace capacitor
Replace motor
Replace motor
Replace lights
Connect wires
Take down the outlet
and seal with glue
Take U-shaped section down
and seal with soap or paint
Replace the blade
Fasten the motor tightly
Tighten the cooker hood
Readjust the distance
Choose a new place to
install the appliance or close
some doors/windows
Tighten screw and
make it horizontal
12
Publicidad
