5. Installation
5.1 Installation the door station
To install the door station, please proceed as described in the following:
I.
Preparation
1.
Please remove the rear cover of the door station and insert 6 AA batteries. Make sure the polarity is
correct.
2.
The LEDs will then light up in green for 5 seconds.
3.
The door station is now functional.
Important:
Weak batteries can cause the device to function incorrectly; please replace any depleted
batteries.
Important:
If you are in battery mode, please press the call button first to start operation of the door
station.
II.
Connecting the door station
11
English