Installing The Monitor - Abus TVAC80020B Manual De Instrucciones

5.3 Installing the monitor

1. Connect the power supply unit to the monitor.
2. Switch the device on. To do so, press the power button.
3. You can now connect the monitor to the door station.
To do so, please proceed as follows:
When the menu item "Camera set up" appears on the monitor, select the sub-item "Pairing" and press
the pairing button on the door station.
Important:
Please note that if the monitor does NOT have an external power supply, it must be
charged for at least 8 hours prior to being used for the first time.
The batteries will provide power for approx. 3.5 hours.
Important:
The integrated battery allows you to use the LCD monitor flexibly.
If the battery LED lights up in red, then the batteries must be charged. Please note that the
battery is always charged to a level which guarantees loss-free recording.
To display the monitor images on another display unit, please proceed as follows:
1. Connect the jack plug to the AV OUT connector on the monitor.
2. Then connect the RCA cable as shown in the drawing.
13
English