Camera Settings; Recording Settings - Abus TVAC80020B Manual De Instrucciones

6.3 Camera settings

Camera brightness
Pairing = add door stations

6.4 Recording settings

Visiting Record = visitor is being recorded
SD Card Format
= memory capacity on SD card
To change the camera brightness level, press
the OK button which appears under the menu
item "Camera brightness".
A selection bar with settings from 0 to 9
appears.
Settings can be changed using the ◄► buttons,
and be confirmed by pressing the OK button.
The connection between the door station and
the monitor is set up under the menu item
"Pairing".
To do so, press the OK button.
The system will now search for the connection to
the door station, with a round arrow appearing
for 60 seconds.
Press the PAIRING button on the door station
for these 60 seconds.
When a connection is established, the
monitor will switch to a live cast.
Press the OK button to switch between ON and
OFF. If you switch it to OFF, the visitor will not
be recorded on the SD card when the bell is
pressed.
This indicates the memory capacity which is
available, and the free memory capacity, on the
SD card.
16
English