Bosch Unlimited BBS812PCK Instrucciones De Uso página 61

8
Fig.
When the appliance is running the turbo function can
be activated by pushing the turbo switch on the vacu-
um cleaner in the direction of the arrow. The indicator
light will flash green rapidly.
Runtime*
Like every other Li-Ion battery the Power for ALL bat-
tery is subject to natural wear as well. That means the
battery capacity and thus runtime decrease over time.
This is a natural aging process and not the result of a
material/production failure or a product defect.
Runtime optimized
mode
18V 2,5Ah
On normal Up to 35
mode min.
with non-
electrical
accesso-
ries
On normal Up to 30
mode with min.
electrical
nozzle
Turbo Up to 6
mode with min.
electri-
cal floor
nozzle
Hint: The appliance has intelligent battery detection.
With the 18V 3,0Ah and 2,5Ah Power for ALL batteries,
the appliance is optimized for runtime. With the 18V
6,0Ah Power for ALL battery, the appliance is opti-
mized for performance (see table)
The natural wear can be prolonged with the following
measures:
‡
Charge the battery only within a temperature range
between 0 °C and 45 °C.
‡
Store the battery only within a temperature range
between -20 °C and 50 °C.
‡
Do not store the battery fully-charged or completely
discharged over a long period of time.
9*
Fig. Vacuum-cleaning with accessories*
Attach the nozzles to the suction tube or the appliance's
connection port as required:
a) Crevice nozzle for vacuuming crevices and corners, etc.
b) 2-in-1 furniture brush with upholstery nozzle for vacu-
um-cleaning window frames, cupboards, furniture, etc.
‡
After use, reinsert the crevice nozzle and 2-in-1 fur-
niture brush with upholstery nozzle into the acces-
sories holder.
Perfor-
mance
optimized
mode
18V 3,0Ah 18V 6,0Ah
Up to 40 Up to 40
min. min.
Up to 35 Up to 35
min. min.
Up to 10 Up to 10
min. min.
After using the appliance
‡
Switch off the appliance once you have finished va-
7
cuuming.
Fig.
10
Fig. Emptying the dust container
In order to achieve the best possible vacuuming re-
sults, the dust container should be emptied after every
use or, at the latest, when dust at one point in the dust
container has reached the mark.
We recommend that you do not fill the dust container
beyond the mark as this may lead to the filter becoming
clogged with dust.
When emptying the dust container, always check how
much dust there is in the filter unit and, if necessary,
clean it as detailed in the "Filter care" instructions.
!
Caution: The filter can only be cleaned if the appli-
ance is switched off.
Never vacuum-clean without the filter unit in place.
11
Fig.
‡
Use the release button to release the dust container,
and remove the dust container from the appliance.
12
Fig.
‡
Take the filter unit out of the dust container
‡
Empty the dust container.
13
Fig.
‡
Remove any dirt that may have been lodged under-
neath the container ejector opening.
‡
Insert the filter unit into the dust container, making
sure it is correctly seated.
‡
Insert the dust container into the appliance, so that
it clicks audibly into place.
!
Caution: If you notice any resistance when inserting
the dust container, check that the filter is complete
and that the filter unit and dust container are correct-
ly seated.
Filter care
The filters should be cleaned at regular intervals in or-
der to ensure that the vacuum cleaner operates opti-
mally.
‡
Please switch off the appliance to clean the filters.
!
Caution: The filter can only be cleaned if the appli-
ance is switched off.
‡
Remove the dust container from the appliance.
11
Fig.
‡
Take the filter unit out of the dust container.
14
Fig. Cleaning the plate filter
‡
To clean the plate filter, turn the knob at least three
turns through 180°.
‡
Then remove the plate filter from the outer filter unit
and empty the dirt.
We recommend that you clean the plate filter each time
you empty the dust container.
* Depending on model
12
.
Fig
61