Trevi EC 886 Manual De Instrucciones página 10

ENGLISH
INSTALLATION
The device can work with batteries or by DC power supply.
OPERATION WITH BATTERIES
Open the battery compartment (5) and insert "AAA" 1,5V
attention to respect the indicated polarities.
OPERATION WITH POWER SUPPLY
Connect the type-C socket of the cable supplied to the socket (6); connect the
other end, with the USB socket, to the power supply and connect the latter to
a 110-230V~50/60Hz power outlet.
FUNCTION OF BUTTONS
BUTTON MODE
a. In normal mode, press this button to switch time, year, date display.
b. In normal mode, press and hold 3 seconds button to enter the time setting.
BUTTON ALARM
a. In normal mode, press this button to turn on/off the alarm.
b. In normal mode, press and hold this button to enter alarm setting.
BUTTON UP
a. In normal mode, press this button to adjust the volume (three levels: 01 is
the lowest, 03 is the loudest).
b. Press to increase the setting value during setting.
c. Press and hold 3 seconds button for fast adjust during setting mode.
BUTTON DOWN
a. In normal mode, press this button to change the LED color.
b. Press to decrease the setting value during setting.
c. Press and hold 3 seconds button for fast adjust during setting mode.
BUTTON SNZ/ LIGHT
a. Press this button to open backlight for 10 seconds (without USB cable, only
use the batteries).
b. Press this button to adjust the backlight: HI/MI/LO/OFF. (with DC adapter).
c. Press to activate the snooze function when alarming.
10_
1
2
3
4
5
EC 886
batteries, paying