Publicidad
Idiomas disponibles
Idiomas disponibles
3
Technical features
Weight (main frame): .............................................................. kg 16,5
Weight (winch): ..................................................................... kg 9,5
Weight (descending brake): ..................................................... kg 5
Breaking strength with brake installed: ........................................ kg 7500
Safe working load limit with winch installed: ................................ kg 1200
Safe working load with descending brake installed: ...................... kg 1500
4
Working area
ARBPRO LD2 is designed and manufactured only for tree care operations, to lower
branches and limbs during pruning and rigging operations.
It must be attached at the base of a tree with correct dimensions and enough strength
to complete the job. User must be trained and must be sure that the tree has enough
strength to support forces generated by rigging operations.
5
Rigging rope
ARBPRO LD2 must be used only in combination with high quality textile ropes. In no
circumstances can it be used with metal wire ropes.
Use of double braided polyester ropes is recommended in the dimensions written in
this manual.
Always check rigging gear before using it. User must check rope condition and be
sure of rope strength. In case of any doubt on rope condition, replace it with a new
one.
Rope size depends on the installed application. Tht following rules must be respected:
ARBPRO LD2 with winch installed: rope diameter must be 12,14 or 16mm (½" -
•
9/16" or 5/8")
ARBPRO LD2 with descending brake installed: rope diameter must be 12, 14, 16
•
mm or 19 mm (½", 9/16", 5/8" or 3/4")
ENGLISH | 21
Publicidad
