Publicidad
Idiomas disponibles
Idiomas disponibles
24 | Arbpro LD2 - Instruction Manual
Fig 6
If ARBPRO LD2 is in a posi-
tion not allowing correct
rope entry angles, it is im-
perative to redirect the rope
to obtain a correct installation.
See picture n. 7
Attention!
Rigging rope must enter the device verti-
cal. Entry angles must not exceed 15°.
When bollard is installed DO NOT use
guide hook (12). Guide hook must be
only used when the winch is installed.
With bollard installed rigging rope must
go behind the two pins 15. For more in-
formation refer to picture n. 10.
Fig 7
Publicidad
