Dometic DE 15F Instrucciones De Montaje Y Uso página 28

EN DE 15F, DE 24F, EA 15F, EA 24B, EA 24D, EA 24F
• Defrost the beverage center as soon as a layer of
ice forms.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the
shelves and drawers according to their position
on delivery.
• On a regularly basis, ensure the door seal still fits
properly.
• Clean dust and dirt from the condenser at regular
intervals.
• Do not line shelves with aluminum foil, wax paper
or paper towels, as they prevent proper air circu-
lation.
Locking/unlocking the device (DE 15F,
DE 24F, EA 15F, EA 24B, EA 24F only)
NOTICE! Damage hazard
Ensure the key is fully inserted into the key-
hole before rotating it.
Insert the key into the lock and rotate it as follows:
Clockwise: Lock the device.
Counter-clockwise: Unlock the device.
Switching the device on/off
Press the on/off button for 6 s to switch the de-
vice on or off.
NOTE After switching on the device
needs some time before the compres-
sor starts.
Check the device for leaks after switching it on for
the first time.
Locking/unlocking the control panel (DE
15F, DE 24F only)
The control panel is equipped with a lock function to
avoid unintentional settings.
Press the on/off button and the light button simul-
taneously for 2 s to lock or unlock the control pan-
el.
Switching the light on/off
The interior LED turns on when the device is opened
and turns off when it is closed.
26
To switch on or off the interior LED while you keep
the door open, press the light button. The interior
LED to switches on when you open the door next
time.
EA 15F, EA 24B, EA 24D, EA 24F only
To switch on or off the interior LED permanently
press the light button for 6 s.
The manual light setting is activated. The display
shows CL for a few seconds when the manual light
setting is switched on. The display shows OP for
a few seconds when the manual light setting is
switched off.
Setting the temperature
Press the setting button to adjust the temperature
by 33.8 °F (1 °C) / 1 °F (– 17.22 °C).
The temperature value on the display flashes during
the temperature setting. 3 s after setting the tempera-
ture, the display shows the current temperature in the
device. The temperature value changes by increasing
or decreasing until the set temperature in the device
is reached.
Changing the temperature unit
Press the setting buttons simultaneously for 2 s to
change the temperature unit.
The symbol for the corresponding unit lights up.
Defrosting the device
A slight layer of ice or water droplets can form in
the interior of the device if it has been cooling for
longer periods. This may have several reasons (see
Troubleshooting).
1. Remove all items from the device.
2. Press the on/off button for 6 s to switch the device
off.
3. Leave the door open.
4. Wipe the condensate water from the device with a
dry cloth when the ice has melted.
5. Clean the device with a damp cloth
Moving the device
WARNING! Risk of injury
Move the device with at least 2 people.