Publicidad
Idiomas disponibles
Idiomas disponibles
Care and Cleaning
1. Remove Water Reservoir, Water Reservoir Lid, and Drip Tray.
Wash in hot, soapy water. Rinse and dry.
NOTE: Do not wash any removable parts in dishwasher.
Troubleshooting
Water flow paused or unit made a brief noise during initial Filter flush.
• Neither is a concern and should only happen during setup as air
is initially purged from the Filter. If the water flow pauses, simply
release Button, then press again to resume the water flow.
Indicator Light is flashing red.
• Water Filter is missing. Indicator Light will flash until Filter is
installed correctly. Once Water Filter is inserted, Light stops
flashing.
• Water Filter is incorrectly installed. Remove Water Filter and
reinstall until you hear 2 clicks to ensure Filter is fully inserted.
• You're way past your Filter's useful life. Replace your Water Filter.
Light will stop flashing upon proper installation.
Filter is difficult to insert.
• Make sure that the Filter is inserted with Brita logo facing you.
• Place hand on top of Brita Hub™ Compact during filter insertion
to provide additional support.
w WARNING
Electrical Shock Hazard. Disconnect power before cleaning.
Do not immerse power cord, plug, or base in water or other liquid.
2. Wipe outside with a damp cloth and dry.
Water will not stop dispensing.
• Automatic dispensing may have been activated. Press ( )
Dispense Button to stop dispensing.
Cup is overflowing.
• Use a glass that is larger than the amount you are dispensing.
Unit doesn't dispense.
• Replace Water Filter. Used Water Filter may need to be replaced
due to clogging from particulates. Do not reset Filter life without
replacing Filter.
Water flow has slowed before end of Water Filter life.
OR
Indicator Light is flashing red before 6 months.
• You may need to change your Filter more or less often than 6
months/120 gallons (454 L) depending on amount and quality of
water you consume. For water with high levels of sediment, sand
and/or rust, Brita Hub™ Water Filter may need to be changed
more frequently to maintain desired flow rate.
9
Publicidad
