Create Modern Manual De Instrucciones página 11

Timer
• The towel rail has the function of programming through the timer. You can program the
towel rail 24 hours a day from Monday to Sunday.
Press the button
timer mode it will work with the factory settings. The factory de-
fault settings are Day Mode (5:00 to 23:59) and Night Mode (24:00
to 4:59).
If you want to change the configuration follow the steps below:
• press the key for 3 seconds, then press the key again
the day you are on.
You can change the setting with the keys
or decrease. If you hold down the key
advance faster.
Hour: 0-23h Minutes: 0-60 min. Days: 01 Monday, 02 Tuesday, 03
Wednesday, 04 Thursday, 05 Friday, 06 Saturday and 07 Sunday.
Once the time and day you are on have been set, you can set the
weekly timer by pressing the key again. , the display will show P1
(Monday).
1. Hold pressing the key
2. Pressing the key
come on. Pressing the key
so the heater will not turn on.
3. Once P1 (Monday) has been set, press the key again
to the next days of the week and set the weekly schedule you
want.
RE STOR E FACTORY SE T T I NGS
1. If you want to restore factory settings, long press the button
2. The screen will display for 3 seconds and then turn off.
3. Press the key again
• Unplug the appliance and allow it to cool down before cleaning it.
• Use a soft cloth to gently clean the surface of the towel rack.
• Never clean the towel rack with abrasive products to avoid damaging the surface.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric
and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates
that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached
the end of their useful life must be given to waste disposal centres specialising in separate collection of waste electrical and
electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis.
The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of
in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and
optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves
application of the administrative sanctions according to the laws.
to access the settings. When you first use the
for 3 seconds to enter the settings of the selected day.
will mark the time you want the heater to
will briefly remove the time stamp
and the factory reset will appear again on the heater.
CLEANING
to change the hour, minutes and
0 to increase
0 the numbers will
to advance
for 10 seconds.
E NGLI SH
11