Create Modern Manual De Instrucciones página 9

C O NTROL PAN E L
Antifreeze
Night mode
Day mode
Mode
Rapid heating
Blocking
Timer button
Increase button
FUNCTI ON I N G
Before starting to use this device, make sure that the product is in perfect condition, well
assembled and meets the corresponding electrical requirements.
1. Connect the plug to the mains. The display will turn on and the time and day will appear.
2. Press the power button
3. Select the mode you want to use by pressing the Modes key .
By pressing this key you will be able to navigate between the different modes: Day mode,
Night mode, Antifreeze mode, Timer, Vacation mode or Fast heating mode.
If you want to set the timer you can press the key
4. Select with the keys
decreases in a sequence of 0.5ºC.
5. Once the mode and the desired temperature have been established, the heater will start
operating.
M O DE S
Day mode
• The default temperature of this mode is established at 19ºC, you
can change this temperature using the buttons
temperature range of this mode can be adjusted from 7ºC to 30ºC.
Night mode
• The default temperature of this mode is 15ºC. You can adjust it in
a range from 7ºC to 30ºC. Press the keys
desired temperature.
• It will not be possible to set a temperature higher than that of the
day mode.
Antifreeze mode
• The default temperature of this mode is 7ºC.
INSTRUCTIONS FOR USE
to start using your heated towel rail.
either the desired temperature. The temperature increases or
and you will go directly to the settings.
and . The
and to set the
Timer
Holiday mode
Heating
Open window
Time setting
On/Off button
Modes button
Decrease button
E NGLI SH
9