Publicidad
3
1
4
FIG.A
TO ASSEMBLE:
1. Remove all components from the box and lay flat on the floor.
NOTE: Some parts are connected by the strings of lights and
should not be completely separated.
2. Insert the metal hook of the Legs (D) into the corresponding
metal cylinder of the Body (B). (FIG.A STEP 1)
3. Insert the metal hook of the Head (A) into the corresponding
metal cylinder of the Body (B).(FIG.A STEP 2)
4. Insert the metal hook of the Tail (C) into the corresponding metal
cylinder of the Body (B).(FIG.A STEP 3)
5. Insert the metal hook of the Leg (D) into the corresponding
metal cylinder of the Leg (D) .(FIG.A STEP 4)
6. "VERY IMPORTANT: Secure the installing points with Plastic
ties (E) and secure the base to the soft ground by fully inserting
the four Ground stakes (F) into the ground.
7. Plug the light set into a power outlet.
SAVE THESE INSTRUCTIONS
MADE IN CHINA
06
2
4
FIG.B
Doe
Part
Description
A
Ear
B
Head
C
Body
D
Legs
E
Legs
F
Tail
G
Support bar
H
Plastic ties
I
Ground stakes
Illustration
Qty
2
1
1
2
2
1
1
8
4
07
Publicidad
