Publicidad
MAKE SURE TO FOLLOW THE STEPS BELOW
FOR A SUCCESSFUL & EASY ASSEMBLY
TIP: To ensure the final unit is secure and sturdy it is highly
recommended to secure each component with the zip ties provided
after connecting each component together in the steps.
TO ASSEMBLE:
1. Remove all components from the box and lay flat on the floor.
NOTE: Some parts are connected by the strings of lights and
should not be completely separated.
2. Insert the metal hook of the Legs (D)and Legs (E)into the
corresponding metal cylinder of the Body (C). (FIG.A STEP 1)
3. Insert the metal hook of the Head (B) into the corresponding
metal cylinder of the Body (C). (FIG.A STEP 2)
4. Insert the metal hook of the Body (C) and the Leg (D)into the
corresponding metal cylinder of the Support bar (G). (FIG.A
STEP 3)
5. Insert the metal hook of the Ear (A) into the corresponding metal
cylinder of the Head (B). (FIG.A STEP 4)
6. Insert the metal hook of the Tail (F) into the corresponding metal
cylinder of the Body (C). (FIG.A STEP 5)
7. "VERY IMPORTANT: Secure the installing points with Plastic
ties (H) and secure the base to the soft ground by fully inserting
the four Ground stakes (I) into the ground.
8. Plug the light set into a power outlet.
WARNING: To reduce the risk of fire or electric shock, if one or more
bulbs do not illuminate, replace the bulb(s) according to the "User
Servicing Instructions" section of the included "Important Safety
Instructions" sheet.
08
4
5
2
3
1
3
SAVE THESE INSTRUCTIONS
MADE IN CHINA
1
FIG.A
FIG.B
09
Publicidad
