Led Status; Back Panel Introduction - Leviton Luma-Net LumaCAN Manual Del Usuario

LED Status

Network LED
Ethernet Link
TX
®
Luma-Net Link
Error
TX
TM
LumaCAN Link
Error
TX

1.5 BACK PANEL INTRODUCTION

Power
Expansion
+12-24VDC
0.6A
Primary Power
Input
Terminals
NOTE: The MS/TP, LumaCAN
State Meaning
Solid Connected to network
Blink Receiving Data
Blink Transmitting Data
Solid Token is moving through network
Data is being received
Solid Network is in Break
Blink Transmitting data
Solid Connected to network
Blink Data is being received
It is normal for this LED to blink infrequently except under
heavy network traffic.
Solid CAN error count over 128, excessive retries, verify network
connectivity. Automatically turns off once system operates
normally for a period of time.
Blink Data is being transmitted
It is normal for this LED to blink infrequently except under
heavy network traffic.
LumaCAN TM
Termination Switch
Lu m a C A N A
Lu m aC AN B
Wire Per TIA-568B Wire Per TIA-568B
THRU
THRU
US Technical Suppor t
LumaCAN
Connection
TM B and Expansion connection points are for future use.
LumaCAN TM Power
Segmentation Switch
MS/TP Luma -N et
Made in
Luma-Net
TM
Termination
Switch
TM
LumaCAN
Page 4
Factor y
Defaults
Memory Ethernet
®
SD Card
Ethernet
®
Luma-Net
Connection