Publicidad
Idiomas disponibles
Idiomas disponibles
Important information concerning installation
• It is intended to be used exclusively for the storage of wine.
• This refrigerating appliance is not suitable for the freezing
foodstuffs.
• The wine cooler is recommended to be designed at 12°C.
• The shelves placed in factory mode is the most efficient use of
energy for the refrigerating appliances.
• Avoid locating the unit in moist areas.
• Keep the appliance away from direct sunlight and sources of heat
(stove, heater, radiator, etc.). Direct sunlight may affect the acrylic
coating and heat sources may increase electrical consumption.
Extreme cold or hot ambient temperatures may also cause the
appliances not to perform properly.
• Plug the wine cooler into an exclusive, properly installed-grounded
wall outlet. Do not under any circumstances cut or remove the third
(ground) prong from the power cord. Any questions concerning
power and/or grounding should be directed toward a certified
electrician or an authorized products service center.
• To
ensure
recommendations given in the present manual.
• Unpack the appliance and visually check that it is not damaged.
Do not connect a damaged appliance. Inform your retailer or point
of sale of any damage. In such a case, keep the packaging.
• It is recommended that the appliance be allowed to settle for at
least 24 hours before connecting the electrical power supply, so
that the compressor fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To ensure
proper
electrical
connection,
follow
the
36
Publicidad
