Descargar Imprimir esta página

Nolangroup N-Com X Serie Seguridad E Instrucciones página 49

Ocultar thumbs Ver también para N-Com X Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 129
Press the "ON" confirmation key to restore all the factory settings of the device.
G. Exiting the configuration*
To exit the "Configuration" menu, press the key "" or "" until you hear the voice
announcement "
Exit the configuration
Press the "ON" confirmation key to exit the "Configuration" menu.
If no key is pressed within 15 seconds, the device automatically exits the "Configuration" menu.
9.
MOBILE PHONE / MP3 PLAYER PAIR UP
Make sure the B902 is turned off.
Put the system in the "Pairing up" menu: press the "ON" key and keep it pressed for 4 seconds,
until you hear the voice announcement "
Press the key "" to access the "
Activate the search of Bluetooth devices on the mobile phone.
Select the N-Com device. If a password is requested, enter 0000 (four zeros).
Connection between the two devices is established after a few seconds.
N.B.: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two
devices are turned off. As a result it needs to be carried out only once.
Automatic Connection
Manual Connection
10. SECOND MOBILE PHONE PAIR UP
The B902 system can be hooked up to two phones at the same time. The second phone (secondary
device) can receive calls but not make them.
To pair up the second Bluetooth phone (secondary device):
Make sure the B902 is turned off.
Put the system in the "Pairing up" menu: press the "ON" key and keep it pressed for 4 seconds,
until you hear the voice announcement "
Press the "" key until you reach the option "
Activate the search of Bluetooth devices on the mobile phone.
Select the N-Com system from the list. If a password is requested, enter the code 0000 (four
zeros).
After a few seconds, the connection between the two devices is activated.
N.B.: The affiliation is stored in the helmet and in the cell phone and it is not lost when the two
devices are turned off. As a result it needs to be carried out only once.
Once the Bluetooth device has been paired up, connection is automatic when the system is turned
on.
".
Pairing up Menu
Mobile phone pair up
Once the Bluetooth device has been paired up, connection is automatic
when the system is turned on.
In case connection is not automatically initiated after a few seconds, you
can connect from the Bluetooth device or by pressing "ON" and keep it
pressed for about 2 seconds.
Pairing up Menu
Second mobile phone pairing
".
" mode.
".
".
17

Publicidad

loading

Este manual también es adecuado para:

N-com b902 xBncom00000039blk