Publicidad
Idiomas disponibles
Idiomas disponibles
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
Through the N-Com EASYSET APP, the "
mode allows the N-Com systems to be recognised and stored through a QR code
generated on one's smartphone.
Intercom Easy Pairing
The
17.2.
Pairing up other N-Com
Important: The procedure described here below refers exclusively to the pairing up of "900" series N-
Com systems with N-Com systems OTHER THAN the "600"/"900" series
•
Make sure the systems are turned off.
•
Put B902 system in "Pairing up" menu: press the "ON" key and keep it pressed for 4 seconds, until
you hear the voice announcement "
•
Put the N-Com system in "Setting" mode: press the "ON" key and keep it pressed for 4 seconds,
until the blue LED starts to flash quickly.
•
On B902 system, press the key "" until you reach the option "
•
On B902 system, press the key pertaining to the "pre-setting position" where you wish to save the
other N-Com system.
Pairing up CHANNEL 1
Pairing up CHANNEL 2
Pairing up CHANNEL 3
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
17.3.
Intercom function (one-to-one connection)
To establish an Intercom connection with one of the systems stored in memory, simply press the
command related to the channel where the system was saved.
Connection CHANNEL 1
Call CHANNEL 2
Call CHANNEL 3
Disconnection of active intercom
N.B.: In case the pre-setting position is empty, or the system being called cannot be reached within
the maximum range or it is already engaged in a phone call, you will hear an error voice message.
N.B.: In case the Intercom connection system falls outside the range (Intercom connection
interrupted), the B902 system will automatically try to reconnect every 8 seconds. Double beeps will
be emitted until the Intercom connection is not restored.
2
Except for Bluetooth kit and Bluetooth kit2, which are not compatible.
Intercom Easy Pairing
function is only available for B902 systems.
Pairing up Menu
".
Briefly press "n".
Press the "n" key twice.
Press the "n" key three times.
Briefly press "n".
Press the "n" key twice.
Press the "n" key three times.
Briefly press "n".
" can be carried out. This
2
.
Pairing up other N-Com
".
23
Publicidad
