Montarbo NETTUNO 50 Serie Manual De Uso página 39

QUICK SETUP
11
11.1
Position the subwoofers. Place the feet of the top
subwoofer into the corresponding recesses in the
bottom subwoofer.
11.3
If there are two systems side by side, fit the top into the
corresponding side recesses and screw the knob into the
side mechanical fixing point.
11.2
Then secure the top to the subwoofer by fitting it in the
corresponding recesses and fastening it to the central
mechanical fixing point with the knob.
11.4
100°
50°
STANDARD
DIRECTIVITY
In this case, turn the horns of both tops to obtain the
correct acoustic coverage as follows: undo the eight
screws (four per side) and remove the grille; remove the
horn after undoing the corresponding eight screws, turn
it by 90° and remount it. The horn is normally mounted
as shown in the figure, with a coverage of 100°x50
(HxV). The arrows instantly show its orientation.
user manual
50°
100°
HORN
ROTATED
39