Publicidad
Idiomas disponibles
Idiomas disponibles
Initial commissioning
Check the spotlight and included parts
NOTE!
Risk of damage!
Carelessly opening the packaging with a
sharp knife or other pointed objects can
quickly damage the spotlight.
− Proceed with great care when opening.
1. Take the product out of the packaging.
2. Check if the delivery is complete (see Fig. A).
3. Please check the spotlight itself and all its components
for damage. Should you detect any damage, do not use
the spotlight. Pleas contact the manufacturer's service
address stated on the warranty card.
Charge the spotlight
You must first fully charge the spotlight's battery before using
it for the first time. Charging takes about 5-6 hours.
1. Ensure that the spotlight is switched off.
2. Unwrap the USB charging cable
3. Plug the supplied USB charging cable
5
USB-C socket
on the spotlight (see Fig. B) and
connect the cable to a SELV-safe charging adapter
(not included/5 V, max. 2 A).
4. The battery status indicator
battery is charging (see Fig. B).
5. As soon as the battery is fully charged, all four lamps of the
battery status indicator
the spotlight from the power supply.
The product cannot be switched on during the
charging process, thus continuous operation is
not possible.
2
completely.
2
into the
3
flashes green when the
3
light up green. Disconnect
Operation
The spotlight offers three brightness levels (100%, 50% and
25%).
1. Press the battery level indicator button
the battery level (see Fig. B). When the battery is fully
charged, all four lamps of the battery status indicator
4
light up green. The lower the charge level, the fewer
lamps light up. When the battery is fully charged, the ope-
rating time is approx. 2 hours.
2. Carry the spotlight by the carrying handle
desired place of use.
3. To switch on the spotlight, press the On/Off switch
(see Fig. B).
4. The LED lights up at brightness level 100%.
5. To reduce the brightness, press the On/Off switch
very lightly.
6. The LED lights up at brightness level 50%.
7. To reduce the brightness further, press the On/Off switch
8
very lightly again.
8. The LED lights up at brightness level 25%.
9. To set up the spotlight, fold out the carrying handle
so that the light falls on the application surface at the de-
sired angle.
10. To switch off the spotlight, press the On/Off switch
Using the battery as a power bank
Connect your device to be charged to the spotlight via a USB
charging cable by inserting the USB plug into the USB socket
6
(see Fig. B).
4
to check
1
to the
8
8
1
8
.
Publicidad
