Publicidad
Idiomas disponibles
Idiomas disponibles
This OPD safety feature
is identified by a unique
triangular hand wheel. Use
only tanks equipped with
this type of valve.
• LP tank must be arranged
for vapor withdrawal.
LP (Liquefied Petroleum Gas)
• LP gas is non-toxic, odorless and colorless
when produced. For Your Safety, LP gas
has been given an odor (similar to rotten
cabbage) so that it can be smelled.
• LP gas is highly flammable and may ignite
unexpectedly when mixed with air.
LP Tank Filling
• Use only licensed and experienced dealers.
• LP dealer must purge tanks before filling.
• Dealer should NEVER fill LP tank more than
80% of LP tank volume. Volume of propane
in tanks will vary by temperature.
• A frosty regulator indicates gas overfill.
Immediately close LP tank valve and call
local LP gas dealer for assistance.
• Do not release liquid propane (LP) gas
into the atmosphere. This is a hazardous
practice.
• To remove gas from LP tank, contact an
LP dealer or call a local fire department for
assistance. Check the telephone directory
under "Gas companies" for nearest certified
LP dealers.
LP Tank Exchange
• Many retailers that sell appliances offer you
the option of replacing your empty LP tanks
through an exchange service. Use only those
reputable exchange companies that inspect,
precision fill, test and certify their cylinders.
Exchange your tank only for an OPD safety
feature-equipped tank as described in the
"LP Tank" section of this manual.
• Always keep new and exchanged LP tanks
in upright position during use, transit or
storage.
• Leak test new and exchanged LP tanks
BEFORE connecting to appliance.
6
LP Tank Leak Test
For your Safety
WARNING
Appliance must be leak checked outdoors
in well-ventilated area, away from ignition
sources such as gas fired or electrical
appliances. During leak test, keep appliance
away from open flames or sparks.
• Leak test must be repeated each time LP
tank is exchanged or refilled.
• Do not smoke during leak
test.
• Do not use an open flame
to check for gas leaks.
Use a clean paintbrush
and 50/50 soap and water
solution. Use mild soap
and water. Do not use
household cleaning agents.
Damage to gas train
components can result.
Brush soapy solution onto
all weld seams and entire
valve area.
WARNING
If "growing" bubbles appear, do not use
or move the LP tank. Contact an LP gas
supplier or your fire department.
Installing The Lp Gas Cylinder Onto The Grill
1. Check that the cylinder valve is closed by
turning the knob clockwise.
2. Hang the cylinder from the tank hook while
aligning the cylinder ring into the tank
holder at the bottom of legs.
Tank Hook
Tank Holder
Publicidad
