Use Of The 230V De Ac Outlet; Overload Protection In 230V Output - MAG MG1000 Instrucciones De Uso

6.2 Use of the 230V de AC outlet.

NOTE: Check that no devices are plugged into the generator, unplug
everything before starting the engine.
Start up the engine and verify that the 230V current output light indicator is on.
Now you can plug your devices.
230V OUTPUT INDICATOR LIGHT
In order to improve the engine operation and extend the life of the machine, we
recommend a "break-in period" of 20 hours without forcing the generator, with
charges that do not exceed 60% of the equipment's maximum output (480w).
WARNING: Confirm that all electrical devices are in good work conditions
before plugging them to the generator.
If an electrical device is not working properly, is slow or stops suddenly, turn off
the engine immediately and unplug the device.

6.3 Overload protection in 230V output.

In case of overload or short circuit, the protection thermal breaker for overloads
will go from the "OFF" position, disconnecting voltage output.
In case of overload, first unplug any unplugged equipments.
14