Publicidad
Idiomas disponibles
Idiomas disponibles
Instructi ons:
•
Do not wash the brush. If hair is caught in the brush, remove
it with scissors or a knife.
Clean the dust fi lter at least once a month, depending on frequen-
cy of use.
•
Turn the dust bin and remove it.
•
Twist the strainer and remove it.
•
Remove the foam fi lter and bracket.
•
Separate the foam fi lter from the fl eece fi lter by sliding them
apart.
•
Rinse and dry thoroughly. Assemble when dry.
Descripti on of the problem
1. The vacuum cleaner does
not clean well..
2. The vacuum cleaner has
turned off or is not working.
3. The fl oor brush motor
overheats and turns off .
9
Procedure:
1. Empty the dust container.
2. Remove excess dust from
the fi lters.
3. Wash the fi lters.
4. Ensure there is no blockage.
1. Charge the vacuum cleaner
(check that the mains socket
is working and that the switch
is on).
2. The appliance may be
clogged check points 1 to 4
above.
3. Product thermal protecti on
acti vated. Turn off the vacuum
cleaner and let the motor cool
down for an hour before using
it again.
1. The fl oor brush is blocked
— refer to the "Electric brush
cleaning and maintenance"
secti on of this manual.
2. Roller brush motor overhe
ated due to heavy load. This
may be due to prolonged use
on a longpile carpet or soft
rug. Allow the vacuum cleaner
to cool down for a minimum
of an hour before using it
again.
EN
Publicidad
