Craftsman 580.752060 Manual Del Operador página 15

PRODUCT SPECIFiCATiONS
PressureWasherSpecifications
Max Pressure............................. 2,500 PSi
Max Flow Rate............................. 2=3GPM
DetergentMix ........................ Use as directed
Water Supply Temperature .......... Not to exceed IBO°F
Shipping Weight ............................. 73 Ibs=
EngineSpecifications
Bore ............................... 2.5 in. (64 mm)
Stroke ............................. 2.0 in. (50 ram)
Displacement ....................... 9.8 cuin (161 cc)
Spark Plug
Resistor ............................ NGKBPRCES
Set Gap To: ........... 0.028-0.031 in (O.7O-O.8O mm)
IntakeValve Clearance ........... 0.15 ± 0.04 mm (cold)
ExhaustValve Clearance .......... 020 ± 0.04 mm (cold)
FuelCapacity ..................... 029 Gallons (1.1 I)
GENERALRECOMMENDATIONS
Regular maintenancewill improve the performance and
extend the life of the pressure washer. See any Sears or
other qualified service deaier for service.
The pressure washer warranty does not cover items that
have been subjected to operator abuse or negligence. To
receive furl vaiue from the warranty, the operator must
maintain pressure washer as instructed in this manual
including proper storage as detailed in Storage.
Some adjustments wiii need to be made periodically to
properly maintain your pressure washer.
AII service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedulechart.
NOTE:Once a year you should clean or replacetile spark
plug and replacethe air fiiter. A new spark plug and clean air
fiiter assure proper fuel-air mixture and help your engine run
better and last longer.
EMISSIONCONTROL
Maintenance, replacement or repair of the emission control
devicesand systems may be performed by any non-road
engine repair establishment or individual.
15