Descargar Imprimir esta página

FONESTAR MAZ-6600RU Manual De Usuario página 5

Amplificador de megafonia com matriz e multicanal
Ocultar thumbs Ver también para MAZ-6600RU:

Publicidad

Idiomas disponibles

Idiomas disponibles

4
INPUT 1
REAR PANEL
1
2 3 4
FM ANTENNA
230 V
115 V
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED
~110-120 V AC. 50/60 Hz, FUSE: T 12.5 A 250 V
~220-240 V AC. 50/60 Hz, FUSE: T 6.3 A 250 V
POWER CONSUMPTION: 1000 W
1.- FM ANTENNA: Iantenna input for the digital FM tuner.
2.- Power supply voltage selector.
3.- Input for AC mains connection.
4.- Earth screw, to be used if it is not incorporated in the mains.
5.- ZONE 1-6: output for the speakers in each zone. For low impedance 8 Ω speaker connection and high
impedance 100/70 V lines. Connect the speaker line between the COM terminal and the impedance or
line in the required voltage (V).
6.- PRIORITY: INPUT 1 priority terminals using contact closure. Shortcircuit these terminals to activate
priority in input 1. The rest of the inputs will be silenced automatically.
7.- Operating mode selector for INPUT 4. Move the switch to the DVD, CD or AUX position, depending on
the input you are going to use. The inputs have a different sensitivity level.
8.- INPUT 4: aux line inputs, 2 x RCA connectors. Move the switch on the upper part of the inputs to the
appropriate position depending on the input being used.
9.- LINE/PHANTOM 48 V/MIC: sensitivity switches for inputs 2-3 and 48 V phantom power. These switches
have three positions:
- LINE: in this position, line level audio sources, CD players, etc. can be connected to inputs 2-3.
- PHANTOM 48 V: in this position, electret condenser microphones that require 48 V phantom power
can be connected to inputs 2-3.
- MIC: in this position, 30-600 Ω low impedance dynamic microphones can be connected to inputs 2-3.
10.- INPUT 2-3: entradas de micrófono/línea, conectores combo (XLR y jack 6'3 mm).
11.- PRIORITY: interruptor de funcionamiento de la prioridad para la entrada INPUT 1. En la posición OFF,
la entrada 1 no tendrá prioridad con respecto al resto de entradas. Sitúe el interruptor en la posición ON
y la entrada 1 tendrá prioridad sobre el resto de las entradas, que se atenuarán dependiendo del nivel
seleccionado con el control MUTE SENS.
12.- MUTE SENS: control for activating/deactivating priority in INPUT 1. Turn the control wheel clockwise
to its maximum and the rest of the inputs will weaken automatically when a signal is detected in
INPUT 1. Turn it anti-clockwise and the priority function will go to its minimum level.
INPUT 2
INPUT 3
INPUT 4
INPUT 5
5
ZONE 1
COM
8
70 V
100 V
ZONE 2
COM
8
70 V
100 V
ZONE 3
COM
8
70 V
100 V
MODE
MONITOR
6
ZONE 4
PRIORITY
+
COM
8
70 V
100 V
INPUT 4
ZONE 5
COM
8
70 V
100 V
DVD
DVD
CD
ZONE 6
COM
8
70 V
100 V
7
8
- 5 -
SCAN
FM / MP3
MAZ-6600RU
MULTIZONE AMPLIFIER
P
INPUT 3
INPUT 2
INPUT 1
AUX
LINE
MIC
LINE
MIC
CD
PHANTOM
PHANTOM
48 V
48 V
MIC PRIORITY
AUX
ON
MUTE SENS
- 30 dB
9
10
11 12
EN
OFF
0 dB

Publicidad

loading