Publicidad
Initial state: All digits set to „0," lock is closed.
1.
2.
Set the factory code or current user code.
Depress the coding pin in the rotary knob (e.g.,
using a ballpoint pen) and, with the coding pin
depressed, rotate the knob approximately 20°
until the arrow on the knob is aligned centrally
with the red triangle on the lock housing.
You will feel a slight resistance.
3.
Set and record the personal code.
4.
Rotate the knob back to the closed position.
The coding pin jumps back to the starting
position. Open and close the lock. The code is
scrambled.
5.
The lock is closed, and the new personal code
is saved.
EN
Publicidad
