Publicidad
1.
Access code is unknown. Lock is closed.
2.
Insert emergency key.
3.
Rotate the key only 180° clockwise. The rotary
knob remains in the starting position.
4.
Depress the coding pin in the rotary knob (e.g.,
using a ballpoint pen) and, with the coding pin
depressed, rotate the knob approximately 45°
to the stop.
5.
Turn the four code wheels from the rotary
knob one by one until you hear a „click" or
they rotate more than 360°. If a code wheel
cannot be turned further, proceed to the next
one. Afterward, rotate the code wheels in
reverse order for at least 360°.
Hold the rotary knob in its existing position
6.
and ONLY turn the key counterclockwise 180°
and remove it.
7.
Continue rotating the rotary knob clockwise
until it stops. The code resets to „0000."
Ensure that all code wheels are set to „0000."
8.
If the code wheels are NOT on „0000," manual-
ly turn them to „0000."
EN
Publicidad
