Publicidad
Idiomas disponibles
Idiomas disponibles
Using
the
Battery
Recharging
the
battery
pack
Recharging
the battery
pack
as described
below
2
Connect
the
DC output
plug of AC adapter
to the
battery
pack.
2 Connect
the
AC adapter
to the
power
outlet.
•
When recharging
starts, the recharge
LED lights in red.
•
The recharge
LED lights in green when recharging
completes.
Remove
the power
cord from battery
pack.
•
Recharging
usually completes
in about 4-5 hours.
The battery
pack
can be used
for about
300 cycles
of recharging
and operations,
though
this is
variable
depending
on the operating
conditions.
Charge
the battery
pack fully
before
using
it for the first
time.
CAUTION
•
Place
the battery
pack
and AC adapter
on a flat surface
for recharging.
•
Do not short-circuit
the terminals
of the battery
pack
and AC adapter.
Notes:
•
The battery
charger(AC
adapter)
is compatible
with
supply
voltage
between
I00
and 240 VAC
and can be used
universally.
•
When
you want
to use it on an overseas
travel,
however,
be sure
to prepare
a power
plug adapter
matching
the local
power
outlet.
20-EN
Graphics are for representation onlj4 Your unit may differ sl/ghtlj4
Publicidad
