Publicidad
Idiomas disponibles
Idiomas disponibles
•
If the power is switched on while the battery pack is
not fully charged, the player operation may
sometimes become unstable. Be sure to charge the
battery pack fully before using.
• The battery pack is being recharged slowly while the
player is playing with AC adapter connected.
• The battery pack is being recharged
while the player
is at STAND BY mode with AC adapter connected.
• After connecting the battery pack and power on,
press OSD button on remote control at PLAY
PAUSE or STOP status to show symbol " @
"
This symbol indicates capacity of the battery pack.
• While the battery pack has lower capacity,
"_]"
will be flashed to remind you.
AC power
operation
Connect the DC output plug of the AC adapter to the DC IN jack on the player
2 Connect the AC adapter to a power outlet.
Now the player can be operated.
CAUTION=
Be sure to use the AC adapter provided with the player.
Before inserting or removing the DC output ptug of the AC adapter, always be sure to turn off
the power of the portable DVD player.
Removing
the
battery
pack
from
the
player
The battery
pack can be removed
from the player
as described
below.
"_ Turn
off
the
power
of the
player.
2 Turning
the
battery
knob
anti-clockwise
to remove
battery
pack.
22-EN
Graphics are for representation on/j4 Your unit may differ slt_ghtlj4
Publicidad
